Products Flashings Standard Flashings

Standard Flashings

Oatey® invented the flashing industry more than 100 years ago. Today Oatey Flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Oatey Standard Roof Flashings are engineered to accommodate a broad range of pipe diameters. Made of galvanized material, its self-sealing collar slides over a pipe and requires no caulking. 

loading...
Filter by
Product Type
Reset Filters
Showing 8 of 8
038753118536_H_001.jpg - Oatey® 1.25 in. – 1.5 in. Galvanized No-Calk 9 in. x 12.5 in. Base Roof Flashing

Oatey® Galvanized No-Calk® Roof Flashings/Standard Base

Galvanized Steel

Oatey

No Calk

Unfinished

1.25 in. - 1.5 in.

0.65 LB

9" X 12.5"

No

Do not use petroleum based products or paint on flashing collar or plastic base

Not for hot-mopped or built-up roofs

For warranty product details, refer to the Oatey Limited Warranty document

Patented All-Flash® design allows use on multiple pipe sizes

28 gauge Galvanized steel base

Rated 180°F continuous heat and approved for Type B installations

Metal base for pitch from 0-40° or up to 10/12 roof

Self-sealing collar slides over pipe and requires no caulking

Collar will not fade

1.25 in. - 1.5 in.

0.7 LB

9" X 12.5"

Do not use petroleum based products or paint on flashing collar or plastic base

Not for hot-mopped or built-up roofs

For warranty product details, refer to the Oatey Limited Warranty document

Patented All-Flash® design allows use on multiple pipe sizes

28 gauge Galvanized steel base

Rated 180°F continuous heat and approved for Type B installations

Metal base for pitch from 0-40° or up to 10/12 roof

Self-sealing collar slides over pipe and requires no caulking

Collar will not fade

2 in.

0.7 LB

9" X 12.5"

No

Do not use petroleum based products or paint on flashing collar or plastic base

Not for hot-mopped or built-up roofs

For warranty product details, refer to the Oatey Limited Warranty document

Patented All-Flash® design allows use on multiple pipe sizes

28 gauge Galvanized steel base

Rated 180°F continuous heat and approved for Type B installations

Metal base for pitch from 0-40° or up to 10/12 roof

Self-sealing collar slides over pipe and requires no caulking

Collar will not fade

2 in.

0.7 LB

9" X 12.5"

Yes

Do not use petroleum based products or paint on flashing collar or plastic base

Not for hot-mopped or built-up roofs

For warranty product details, refer to the Oatey Limited Warranty document

Patented All-Flash® design allows use on multiple pipe sizes

28 gauge Galvanized steel base

Rated 180°F continuous heat and approved for Type B installations

Metal base for pitch from 0-40° or up to 10/12 roof

Self-sealing collar slides over pipe and requires no caulking

Collar will not fade

3 in.

0.9 LB

11" X 14.5"

No

Do not use petroleum based products or paint on flashing collar or plastic base

Not for hot-mopped or built-up roofs

For warranty product details, refer to the Oatey Limited Warranty document

Patented All-Flash® design allows use on multiple pipe sizes

28 gauge Galvanized steel base

Rated 180°F continuous heat and approved for Type B installations

Metal base for pitch from 0-40° or up to 10/12 roof

Self-sealing collar slides over pipe and requires no caulking

Collar will not fade

3 in.

0.9 LB

11" X 14.5"

Roof flashing slides over DWV pipe for pitch to 40 degrees

Made of rust-proof, stamped 29 gauge galvanized steel

Non-fading sealing collar

Approved for Type B installations

Not for hot-mopped or built-up roofs

Do not use paint or petroleum based products on rubber collars

4 in.

1.15 LB

12" X 15"

Roof flashing slides over DWV pipe for pitch to 40 degrees

Made of rust-proof, stamped 29 gauge galvanized steel

Non-fading sealing collar

Approved for Type B installations

Not for hot-mopped or built-up roofs

Do not use paint or petroleum based products on rubber collars

4 in.

1.15 LB

12" X 15"

Roof flashing slides over DWV pipe for pitch to 40 degrees or up to 10/12 roof

Made of rust-proof, stamped 29 gauge galvanized steel

Non-fading sealing collar

Rated 180 degrees continuous heart and approved for Type B installations

Not for hot-mopped or built-up roofs

Do not use paint or petroleum based products on rubber collars

038753118994_H_001.jpg - Oatey® 1.25 in. – 1.5 in. Thermoplastic No-Calk 9.25 in. x 13 in. Base Roof Flashing

Oatey® Thermoplastic No-Calk® Roof Flashings/Standard Base

Black

Plastic

Oatey

No Calk

Roof flashing slides over vent pipe for pitch to 45 degrees

Non-fading, non-cracking rigid black thermoplastic base

Non-fading sealing collar

Rated 180°F continuous heat and approved for Type B installations

Not for hot-mopped or built-up roofs

Do not use paint or petroleum based products on plastic bases or rubber collars

1.25 in. - 1.5 in.

0.35 LB

9.25" X 13"

0.4 LB

9.25" X 13"

2 in.

0.4 LB

9.25" X 13"

Waterworks

Specialty Chemical

2 in.

0.4 LB

9.25" X 13"

3 in.

0.55 LB

11" X 15"

3 in.

0.55 LB

18" X 18"

4 in.

0.7 LB

12" X 16"

4 in.

0.7 LB

18" X 18"

038753129204_H_001.jpg - Oatey® 1.25 in. – 1.5 in. Aluminum No-Calk 9 in. x 12.5 in. Base Roof Flashing

Oatey® Aluminum No-Calk® Roof Flashings/Standard Base

Aluminum

Oatey

No Calk

Unfinished

Not for hot-mopped or built-up roofs

For warranty product details, refer to the Oatey Limited Warranty document

Rustproof stamped aluminum base allows for easy shaping of flashing

Rated 180°F continuous heat and approved for Type B installations

Metal base for pitch from 0-40° or up to 10/12 roof

Self-sealing collar slides over pipe and requires no caulking

Collar will not fade

Do not use petroleum based products or paint on flashing collar

1.25 in. - 1.5 in.

0.35 LB

9" X 12.5"

2 in.

0.3 LB

9" X 12.5"

2 in.

0.35 LB

9" X 12.5"

1.25 in. - 1.5 in.

0.35 LB

9" X 12.5"

3 in.

0.45 LB

11" X 14.5"

3 in.

0.45 LB

11" X 14.5"

4 in.

0.6 LB

12" X 15"

4 in.

0.6 LB

12" X 15"

038753140124_H_001.jpg - Oatey® 1.25" – 1.5" Flex-Flash™ 9" x 11" base

Oatey® Flex-Flash™ No-Calk® Roof Flashings

Black

Plastic

Oatey

No Calk

Not for hot-mopped or built-up roofs

For warranty product details, refer to the Oatey Limited Warranty document

For pitch from 0-45°

Rated 180°F continuous heat and approved for Type B installations

Self-sealing collar slides over pipe and requires no caulking

Do not use petroleum based products or paint on flashing collar or plastic base

1.25 in. - 1.5 in.

0.35 LB

9" X 11"

1.25-in. - 1.5-in. Flex Flash™ Roof Flashing

9" x 11" Flexible plastic base

2 in.

0.35 LB

9" X 11"

2-in. Flex Flash™ Roof Flashing

9-in. x 11-in. Flexible plastic base

2.5 in.

0.35 LB

9" X 11"

2-1/2" Flex Flash™ Roof Flashing

10" x 13.25" Flexible plastic base

3 in.

0.35 LB

10" X 13.25"

3-in. Flex Flash™ Roof Flashing

10" x 13.25" Flexible plastic base

4 in.

0.45 LB

11.5 x 14 in

4" Flex Flash™ Roof Flashing

11.5-in." x 13.25-in. Flexible plastic base

038753128658_H_001.jpg - Oatey® 4 in. Soft Aluminum 18 in. x 18 in. base

Oatey® Aluminum No-Calk® Roof Flashings/18" X 18" Base

Aluminum

Oatey

No Calk

Unfinished

18" X 18"

Not for hot-mopped or built-up roofs

For warranty product details, refer to the Oatey Limited Warranty document

18 in. x 18 in. Aluminum base

For pitch from 0-40°

Rated 180°F continuous heat and approved for Type B installations

Rustproof stamped soft aluminum base allows for easy shaping of flashing

Self-sealing collar slides over pipe and requires no caulking

Do not use petroleum based products or paint on flashing collar or plastic base

4 in.

0.8 LB

1.25 in. - 1.5 in.

0.7 LB

0.5 in. - 1 in.

0.7 LB

2 in.

0.75 LB

3 in.

0.7 LB

038753119175_H_001.jpg - Oatey® 1.25" – 1.5" Thermoplastic SW 11" x 15" base

Oatey® Thermoplastic No-Calk® Roof Flashings SW/Texas Base

Black

Plastic

Oatey

No Calk

0.55 LB

11" X 15"

Roof flashing slides over vent pipe for pitch to 45 degrees

Non-fading, non-cracking rigid black thermoplastic base

Non-fading sealing collar

Approved for Type B installations

Not for hot-mopped or built-up roofs

Do not use paint or petroleum based products on plastic bases or rubber collars

1.25 in. - 1.5 in.

2 in.

038753119366_H_001.jpg - Oatey® 1.25" – 1.5" Galvanized 18" x 18" base

Oatey® Galvanized No-Calk® Roof Flashings/18" X 18" Base

Galvanized Steel

Oatey

No Calk

Unfinished

18" X 18"

For warranty product details, refer to the Oatey Limited Warranty document

28 Gauge 18" x 18" galvanized steel base

For pitch from 0-40°

Rated 180°F continuous heat and approved for Type B installations

Self-sealing collar slides over pipe and requires no caulking

Do not use petroleum based products or paint on flashing collar or plastic base

Not for hot-mopped or built-up roofs

1.25 in. - 1.5 in.

1.85 LB

1.25 in. - 1.5 in.

1.8 LB

2 in.

1.85 LB

2 in.

1.85 LB

No

3 in.

1.8 LB

4 in.

1.8 LB

038753118895_H_001.jpg - Oatey® No-Calk® 1.25" – 1.5" Thermoplastic Roof Flashing 18" x 18" Base

Oatey® Thermoplastic No-Calk® Roof Flashings/18" X 18" Base

Black

Plastic

Oatey

No Calk

18" X 18"

For warranty product details, refer to the Oatey Limited Warranty document

18" x 18" Thermoplastic base

For pitch from 0-45°

Rated 180°F continuous heat and approved for Type B installations

Self-sealing collar slides over pipe and requires no caulking

Do not use petroleum based products or paint on flashing collar or plastic base

Not for hot-mopped or built-up roofs

1.25 in. - 1.5 in.

1.3 LB

2 in.

1.25 LB

3 in.

1.3 LB

There are no results available

Standard Flashings
Multi-Size Flashings
Colored Flashings
Electrical Mast Flashings
Roof Flashings for Metal Roofs
Side Flashings
Solar Flashings
Rain Collars
Specialty (Breather Vents & Frost Proof)

Helpful Resources

Looking For More Resources?

See All Articles & How Tos