Oatey® invented the flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Oatey Rain Collars act as a protective water shield that slides over the existing flashing and prevents water damage. It can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
Rain Collars

Showing 2 of 2
There are no results available
Helpful Resources
Videos
FAQs
How is a rain collar installed?
After the correctly sized collar has been selected; you will apply a 100% exterior or marine rated silicone caulk to the top of the existing rain collar attached to the roof flashing, and also to the underside of the new rain collar. Slide the new rain collar down over the pipe to the top of the existing collar. Press the new collar down with enough pressure to seal the two together without collapsing the seal around the pipe.
Does the pipe have to be lubricated before the flashing is installed over the pipe?
No. You should however bevel (chamfer) the pipe end to prevent cutting or scaring of the rain collar as it is being pushed over the pipe.
Oatey Blog
It appears that you're using an unsupported browser.
If you are currently using Internet Explorer we recommend you switch to Edge or another supported browser to enjoy the best experience Oatey.com has to offer.