What is the difference between the acid based drain openers, Clobber and Sizzle?
Clobber is a concentrated blend of sulfuric acid and Sizzle is composed of hydrochloric acid. Sulfuric acid is very effective at dissolving organic material, like food, grease and hair; Sizzle is used for dissolving inorganic material like mineral deposits, lime rust and scale.
What is Oatey Pipe/Gasket Lube used for?
Pipe/Gasket Lube is a Non-Toxic soft paste like material used to lubricate bell joint pipe gaskets before assembly. It will not deteriorate natural or synthetic rubbers, and does not support bacteria. It will dissolve in hot water.
Is Hercules plumbers silicone grease safe to use on rubber products?
Yes. This product can safely be used on rubber and synthetic O-rings, and plastic parts. This product does not contain any petroleum products.
What materials can I use Hercules 300 Degree plumbers grease on?
This product should only be used on turning or sliding metal products. It is petroleum based, and could affect the integrity of plastic and rubber parts.
Can you use Hercules 300 Degree plumber's grease where it may come in contact with potable (drinking) water?
No. This product is not NSF listed.
What is the weight of Hercules Lube Oil?
Weight = 20 or ISO 68 viscosity oil.
What are the uses for Hercules Lube Oil?
This product is intended for general lubrication and is safe to use on most circulating pumps as well as bushings, bearings, linkages and sliding parts. This product should not be used on light electric motors.
What type of lubricant should be used on O-rings and other rubber parts?
Silicone grease should be used on rubber parts, because petroleum based lubricants could potentially affect the integrity and lead to product failure.
What are the differences between light and dark cutting oils?
Clear cutting oil is a blend of high quality mineral oils with sulfur base, and is used during manual or low rpm threading on small sizes of steel or brass piping. Clear cutting oil will not stain copper or brass materials either. Dark cutting oil is a blend of high quality mineral oils with sulfur-lard base, and is used when using high speed threading machines on all sizes of pipe.
Can Plumber's Putty be used when installing the drain on an Acrylic tub and / or shower unit?
No. Plumber’s Putties could have an adverse effect on the Acrylic finish similar to the same effect on ABS (Acrylonitrile Butadiene Styrene) materials. You should only use 100% silicone for this application.