Oatey® 2x4 Plastic Brackets, 8" long
Oatey® 2x4 Plastic Brackets allow you to attach water lines from the top or bottom in both commercial and residential applications.
Part #: 38291
Technical Resources (3)
Technical Resources (3)
- Mount for condensate line
- Knockout drain caps
- Direct stud mount capability
- Snap-on faceplate frame accommodates up to 1" drywall
- Two support brackets and direct stud mounts for easy mounting
- Box, Faceplate, and Brackets made from PVC
|Valve Size:||0.75 in.|
|Valve Body Material:||Brass|
|Product Line:||2 x 4|
This box is designed as a termination point for all drain and water connections necessary when installing a washing machine.
Are there height restrictions when installing a washing machine outlet box?
We always recommend that you refer to the washer manufacture instructions to ensure they do not have specific guidelines for finished drain elevations. The maximum height of the WMOB would be determined by the washer manufacture, accessories such as pedestals, and local plumbing codes. Oatey recommends the maximum elevation of the inside bottom of the WMOB is 48” above finished floor. The minimum elevation of the inside bottom of WMOB is 34” above finished floor, this is the same height as the flood level rim of a laundry sink with or without a cabinet.
Does Oatey offer a washing machine or ice maker valve that can easily attach to different pipe materials without adding additional adaptors?
Oatey is pleased to announce that we do offer such a valve for washing machine and ice maker connections; it is called the “Push Connect Valve”. These valves come as part of our Outlet Box collection. They are designed to easily accept ½” Copper, CPVC and PEX pipes, by simply pushing the ½” pipe into the Push Connect Valve Fitting. If for any reason the pipe needs to be removed after installation, no problem. Simply use the quick release tool to remove that section of pipe, and insert the new piece of pipe. No need for solder, pipe joint compounds or thread sealant/Tapes; just cut, de-burr and chamfer (bevel) pipe end before pushing and connecting the pipe.
It appears that you're using an unsupported browser.
If you are currently using Internet Explorer we recommend you switch to Edge or another supported browser to enjoy the best experience Oatey.com has to offer.