Products Copper Installation Solder & Flux Accessories

Accessories

Proper cleaning tools are critical for professional copper installation. You can count on Oatey® and Hercules® to deliver everything from sandcloth to specialty brushes, power brushes, and fitting brushes. 

loading...
Filter by
Product Type
Reset Filters
Showing 13 of 13
032628450134_H_001.jpg - Hercules® 1.5 in. x 10 yds. Hercules® 180 Open Mesh Cloth Dispenser Box

Hercules® Waterproof Abrasive Open Mesh Cloth

Hercules

Open Mesh Cloth

Packaged in a convenient dispenser box

For warranty product details, refer to the Oatey Limited Warranty document

Can be used in wet environments

Made with resin-bonded 180 grit aluminum oxide

Non-clogging

Long lasting

Waterproof

Easily cleaned

No

1.5 in. x 10 yd.

1.5 in. x 5 yd.

038753313207_H_002.jpg - Oatey® 1.5 in. x 10 yds. 180 Open Mesh Cloth

Oatey® 180 Open Mesh Cloth

Oatey

Open Mesh Cloth

Cleans, polishes and deburrs copper pipe and fittings

Resists corrosion

For wet and dry copper piping

Use prior to soldering

Self dispensing package

1.5 in. x 10 yd.

0.4 lb.

182 grit abrasive

1.5 in. x 5 yd.

0.2 lb.

180 grit abrasive

038753314006_H_001.jpg - Oatey® 9 in. x 12 in. Bagged Flame Protector

Oatey® Flame Protector

Oatey

9 in. x 12 in.

Flame Protector

Includes brass eyelets for hanging from a stud or wall

Protects studs, walls, floors, other surfaces from sparks, flame

Can be used while soldering near studs, joists or walls

Ideal for use with propane and max power propylene gas torches

Made with flame-retardant Zoltek Pyron fibers

9 in. x 12 in. cloth

Withstands temperatures up to 2,500°F

038753313290_H_001.jpg - Oatey® 1 in. Inner Diameter Fitting Brush with Heavy Duty Handle

Oatey® Heavy Duty Fitting Brushes

Oatey

Fitting Brush

Can also be used to clean plastic and brass

Heavy-duty fitting brush

Durable, sharp cutting surface

Non-slip, contoured plastic handle for comfort

High-carbon steel bristles

Galvanized steel stem

1 in.

Used to clean 1 in. I.D. copper fittings prior to soldering

1.5 in.

Used to clean 1-1/2 in. I.D. copper fittings prior to soldering

1.25 in.

Used to clean 1-1/4 in. I.D. copper fittings prior to soldering

0.5 in.

Yes

Used to clean 1/2 in. I.D. copper fittings prior to soldering

2 in.

Used to clean 2 in. I.D. copper fittings prior to soldering

0.75 in.

Used to clean 3/4 in. I.D. copper fittings prior to soldering

1 in.

Used to clean 1 in. I.D. copper fittings prior to soldering

0.5 in.

Used to clean 1/2 in. I.D. copper fittings prior to soldering

0.75 in.

Used to clean 3/4 in. I.D. copper fittings prior to soldering

038753314112_H_001.jpg - Oatey® 1.5 in. x 10 yds. 120 Grit Abrasive Sandcloth

Oatey® Plumber’s Abrasive Sandcloth

Oatey

Abrasive Sandcloth

1.5 in. x 10 yd.

0.5 lb.

For warranty product details, refer to the Oatey Limited Warranty document

Use for deburring and roughing copper tubing or plastic pipe

120 Grit Abrasive

1-1/2 In Width

Packaged on rolls in handy dispenser box or carded to keep abrasive clean when storing

Sandcloth backing is covered 100% with a tough aluminum oxide abrasive

Fast cleaning and long life

1.5 in. x 2 yd.

0.15 lb.

For warranty product details, refer to the Oatey Limited Warranty document

Use for deburring and roughing copper tubing or plastic pipe

1-1/2 In width

120 Grit Abrasive

Packaged on rolls in handy dispenser box or carded to keep abrasive clean when storing

Sandcloth backing is covered 100% with a tough aluminum oxide abrasive

Fast cleaning and long life

1.5 in. x 25 yd.

1.3 lb.

For warranty product details, refer to the Oatey Limited Warranty document

Use for deburring and roughing copper tubing or plastic pipe

120 Grit Abrasive

1-1/2 In width

Packaged on rolls in handy dispenser box or carded to keep abrasive clean when storing

Sandcloth backing is covered 100% with a tough aluminum oxide abrasive

Fast cleaning and long life

1.5 in. x 2 yd.

No

Use for deburring and roughing copper tubing, as well as plastic pipe

120 Grit

Packaged on rolls in handy dispenser box or carded to keep abrasive clean when storing

Sandcloth backing is covered 100% with a tough aluminum oxide abrasive that provides fast cleaning and long life

Easy tear

For warranty product details, refer to the Oatey Limited Warranty document

032628450257_H_001.jpg - Hercules® 1.5 in. x 10 yds. Hercules® Grit Roll™ Dispenser Box

Hercules® Waterproof Abrasive Sandcloth

Hercules

Abrasive Sandcloth

Use for deburring and roughing copper tubing, as well as plastic pipe.

Sandcloth backing is covered 100% with a tough aluminum oxide abrasive that provides fast cleaning

No

1.5 in. x 10 yd.

1.5 in. x 25 yd.

038753313481_H_001.jpg - Oatey® 1/2 in. & 3/4 in. 4-in-1 brush

Oatey® 4-In-1 Brush

Oatey

0.5 in. & 0.75 in.

4 in 1 Brush

Use to clean 1/2 in. and 3/4 in. copper and plastic tubes

High-carbon steel ID brush

Hard-tempered steel OD brush

High-impact polystyrene cover

Yes

038753307107_H_001.jpg - Oatey® 1/2 in. Acid Brush – Bulk (per gross)

Oatey® Acid Brushes

Oatey

0.5 in.

Acid Brush

0 lb.

Acid brush

Ideal for applying flux to pipe surfaces and inside fitting

No

Solder accessory

Compatible with most diameters of piping

Tin-plated tubing handle

Made from 100% pure stiff horse hair tiled with steel staple

Use with liquid or paste fluxes

Approximately 3 in. long, 1/2 in. wide

Approximately 6 in. long and 1/2 in. wide

Approximately 4 in. long, 1/2 in. wide

3 brushes included

038753313382_H_001.jpg - Oatey® 1 in. ID Fitting Brush with Wire Handle

Oatey® Economy Fitting Brush

Oatey

Fitting Brush

Economy Fitting Brush are designed for cleaning the inside of copper fittings prior to soldering

High carbon steel brush

Galvinized steel stem

Sizes range from 1/2 inch-2 inch

lLong lasting and durable

Can also be used to clean brass and plastic.

1 in.

1.25 in.

1.25 in.

0.5 in.

2 in.

0.75 in.

038753313450_H_001.jpg - Oatey® 1 in. O.D. Tube Brush

Oatey® O.D. Tube Cleaning Brushes

Oatey

Tube Cleaning Brush

1 in.

Used to clean the exterior of 1 in. pipes prior to soldering

Non-slip outer brush cover

0.5 in.

Tube cleaning brush

Used to clean the outside of 1/2 in. pipe prior to soldering

Cleans copper, brass and plastic piping

Made of strong, high-carbon steel

Non-slip outer brush cover

0.75 in.

Tube cleaning brush

Clean the outside of 3/4 in. pipe prior to soldering

High-carbon tempered steel bristles provide a sharp, durable cutting surface

Use with copper, brass and plastic piping

Cleans the exterior of 3/4 in. pipe

Outer cover provides a secure, nonslip grip

0.5 in.

Used to clean the exterior of 1 in. pipes prior to soldering

Non-slip outer brush cover

0.75 in.

Used to clean the exterior of 1 in. pipes prior to soldering

Non-slip outer brush cover

038753314099_H_001.jpg - Oatey® Nylon Grit Pads

Oatey® Nylon Grit Pads

Oatey

2 in. x 6 in.

Nylon Grit Pad

Can be used on copper and plastic pipes and fittings of all diameters

Water resistant

2 in x 6 in size

Can be rinsed and reused

038753314082_H_001.jpg - Oatey® 1/4 in. & 1/2 in. Power Brushes – Carded

Oatey® Power Brushes

Oatey

0.5 in. & 0.75 in.

Fitting Brush

Power Brushes are designed for cleaning 1/2" and 3/4" diamter copper fittings

Can also be used for cleaning battery cables and terminals, rust and paint removal and drill holes

Shafts fit 1/4" and 1/2" power drill chucks

Shaft made from strong cold rolled steel

Includes 2 high carbon spring steel brushes

For warranty product details, refer to the Oatey Limited Warranty document

038753314105_H_001.jpg - Oatey® Specialty Brushes – Carded

Oatey® Specialty Brushes

Oatey

Fitting Brush

Specialty Brushes can be used to clean threaded pipe and fittings

Easy-to-grip plastic handle

Stainless steel brush for use on hard metals

Brass brush for use on softer metals

Variety of uses

For warranty product details, refer to the Oatey Limited Warranty document

There are no results available

Flux
General Purpose Solder
Plumbing Solder
Accessories

Helpful Resources

Videos

How to Solder Sweat Copper Pipe

See More
FAQs