How do you separate a joint that has been cemented together and cured?
Once a joint has been properly assembled it cannot be cleanly separated without distorting or destroying the pipe/fitting. The joint if properly assembled is stronger than the pipe itself, and will have to be cut out and replaced.
Can you use cleaner instead of primer?
No. Cleaner is only designed to remove surface dirt and grease from the pipe where as primer actually starts the chemical reaction needed to bond the pipe and fittings together.
What are the differences between regular, medium and heavy duty cements?
Number one is the Viscosity and number two is the pipe size to which it is being applied to.
Does Oatey offer cements that will bond High Density Polyethylene (HDPE), Polyethylene (PE), Polypropylene (PP), or PEX?
No. Oatey doesn’t manufacture any solvent cements or bonding adhesives that will work with these plastics at this time.
How do I dispose of solvent cements?
You should always check the guidelines set forth by your local municipalities or local fire department for disposal of hazardous materials.
What is the definition and differences between PVC, ABS and CPVC materials?
ABS/Acrylonitrile-Butadiene-Styrene is only used for drainage, waste and vent (DWV) systems. PVC/Poly Vinyl Chloride is normally used on DWV systems, but in some cases can be used in pressure fluid applications (check with pipe manufacture for specific application guidelines). CPVC/ Chlorinated Poly Vinyl Chloride is normally used exclusively with pressure fluid systems with a variety of temperatures and pressures (check with pipe manufacture for specific application guidelines).
Can I use green transition cement to join different types of pipe together?
Green transition cement can be used to join ABS to PVC or any variation of the two, but only if local building codes approve the application.
What is the definition of Low VOC?
VOC means “Volatile Organic Compound”. Volatile describes a liquid that evaporates at room temperature and Organic is a compound that contains carbon. A low VOC level is considered at or below 150g/L and g/L are grams per liter.
What cements allow for the shortest set-up time, for multiple joint assemblies?
The heavy duty cement has the shortest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the heavy duty cement has the slowest set up time before the joint is assembled because of the slow evaporation process. Any pipe sizes over 4” should be discussed with the technical department.
What PVC cements allow for the longest set-up time, for multiple joint assemblies?
The regular body cement has the longest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the regular body cement has the quickest set up time before the joint is assembled because of the quick evaporation process. Any pipe sizes over 4” should be discussed with the technical department.