What pipe material can the test caps be used with?
All test caps are compatible with ABS and PVC pipe materials. The Knock-Out, End-Cap and MS End-Caps can be solvent welded to ABS or PVC materials with solvent cement matching the pipe material.
How can I keep insects and mice from entering exposed drain pipes during basement bathroom construction?
The toilet and lavatory sink pipes are already sealed against infestation as they pass through the concrete floor. Shower drains are sealed during installation, but tub drain are left exposed as they pass through the concrete. The Oatey Tub Boxes are designed to seal the tub drains that are exposed from under the concrete floor. The tub drain is installed inside the Tub Box before the concrete floor is finished, and the pipe penetration sealed. This completes an insect and rodent free installation.
Can the Access Panels be painted?
Yes. The access panels will accept most paint materials and wallpapers. We suggest that you check with the paint and wallpaper manufactures for their recommended installation instructions before attempting these applications.
Does on tub protector fit all sizes and shapes of tubs?
No. All tubs are different and the following factors must be considered when selecting a tub protector; height, length, width and shape. Oatey offers tub protectors that fit the following tub designs:
14”D x 60”L x 30”W – rectangle
15”D x 57”L x 30”W – rectangle (fits 14” tubs)
16”D x 60”L x 42”W – rectangle
16”D x 60”L x 30”W – oval
16”D x 60”L x 44”W Multi-size adjustable (14” to 16”) - rectangle
When should a tub protector be used?
Tub protectors can be used to protect your tub against most accidental damages during new construction or renovation projects.
Is there a product that can be used to cover damaged floor tile around a toilet?
The Oatey toilet base plate is made from high impact ABS material and is designed for this application. After removing the toilet, clean all debris from tile surface and fill in voids if tile is missing. Place the toilet base plate into position around the toilet flange and set the toilet. After the toilet is tested, apply a small bead of silicone around the base of the toilet and the toilet base plate.
Will the hammer arrestors ever fill with water?
No. The arrestors are gas filled and sealed with internal O-Rings. The only way that the arrestor will fill with water, is if one of the internal O-Rings fail. The O-Rings cannot be replaced and the arrestor would have to be replaced.
Can hammer arrestors be installed upside down?
Yes. Oatey hammer arrestors are gas filled chambers which absorb shock no matter what angle they are installed.
What is the maximum temperature that plastic water heater pans can be exposed to before the integrity of the pan is affected?
The Vicat softening temperature is 180°F