Oatey® 4 oz. PVC Rain-R-Shine® Body Blue Cement
Oatey® PVC Rain-R-Shine Medium Bodied Fast Set Blue Cement is recommended for pool and spa, irrigation, potable water, pressure pipe and DWV applications. It is formulated for wet conditions and quick pressurization, and is easy to apply with included in-lid dauber. This blue, low VOC, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
Part #: 30890
- Rain-R-Shine blue cement solvent welds PVC, dauber included
- Hot cement designed for wet conditions
- Very fast setting for quick pressurization and quick installation
- Can be used on PVC pipe and fittings up to 6 in. diameter with interference fit
- For pool and spa, irrigation, potable water, pressure pipe and DWV applications
- Recommended application temperature of 40°F to 110°F / 4°C to 43°C
- All Oatey solvent cement and primer products are certified to UL Greenguard Gold
- Low VOC solvent cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements, meets ASTM Standard D2564 and complies with NSF/ANSI 61 health effects requirements
- Please refer to the Oatey Limited Warranty for warranty details
|Cherne Specialty Chemical:||No|
|Maximum Application Temperature °F:||110|
|Maximum Application Temperature °C:||43|
|Set Speed:||Fast Set|
|Product Type:||PVC Cement|
|Set Type:||Standard (40 - 105° F)|
|Maximum Use Temperature °F:||140|
Available in 5 Variations
Showing 5 of 5
There are no results available
Cure times vary depending on a wide variety of factors. Please review the documents below and read our blog for more helpful information. Solvent Cement Cure Charts Solvent Cement Instructions
What PVC cements allow for the longest set-up time, for multiple joint assemblies?
The regular body cement has the longest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the regular body cement has the quickest set up time before the joint is assembled because of the quick evaporation process. Any pipe sizes over 4” should be discussed with the technical department.
What cements allow for the shortest set-up time, for multiple joint assemblies?
The heavy duty cement has the shortest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the heavy duty cement has the slowest set up time before the joint is assembled because of the slow evaporation process. Any pipe sizes over 4” should be discussed with the technical department.