Oatey® 4 oz. Great White® Pipe Joint Compound with PTFE
Oatey® Great White® Pipe Joint Compound With PTFE is a non-hardening, non-separating, non-toxic paste that lubricates and seals all threaded joints. This compound permits a tighter assembly with lower torque for secure permanent sealing of all threaded connections. Allows for easy disassembly without stripping or damaging threads. Oatey products have earned the trust of plumbing professionals for over 100 years.
Part #: 31230
- Lubricates and seals all threaded joints
- White, non-hardening, non-separating, non-toxic paste
- For use with water, steam, caustics or diluted acid lines
- Withstands up to 3,000 psi on gases from -50°F to 400°F, and 10,000 psi on liquids from -50°F to 500°F
- Can be used with plastic and metal threads
|Material Compatibility:||Stainless Steel|
The following Oatey pipe joint compound products are approved for use in this application: Oatey Great Blue, Hercules Block, Hercules Grrip, Hercules Megaloc, Hercules Pipe Joint Compound, Hercules Pro Dope or Hercules Real-Tuff are all safe for this application.
What is the curing time for pipe joint compound?
Under normal pressures the pipe joint compounds does not need a curing time. If the pressure in the lines is 125psi or higher, the recommended cure time is 4 hours before initiating pressure. Call Oatey Customer Service when in doubt.
Can pipe joint compound and thread sealant tape be used on the same joint?
Yes. Once the male threads are wrapped properly you can apply a coating of pipe joint compound over the thread sealant tape before assembling the joint. Remember that you only apply pipe joint compound to the male threads.