How are cure times determined?
Cure times vary depending on a wide variety of factors. Please review the documents below and read our blog for more helpful information.
Solvent Cement Cure Charts
Solvent Cement Instructions
< Cements
Oatey® FlowGuard Gold® All Weather CPVC Cement with UV Indicator
Key Features & Benefits
- 8 oz. all weather yellow CPVC cement
- Low VOC, high performance solvent cement that meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements
- Please refer to the Oatey Limited Warranty for warranty details
- Solvent welds CPVC, dauber included
- For cold and hot water systems up to 200°F / 93°C
- Allows for quick, easy inspection of dry fit joints with UV light
- Can be used on copper tube sizes (CTS) CPVC hot and cold potable water pipes and fittings up to 2 in. diameter with interference fit
- Approved for use with FlowGuard Gold® piping systems (registered trademark of The Lubrizol Corporation)
- Recommended application temperature of 0°F to 115°F / -17°C to 46°C
- No primer needed where local codes permit
Specifications
| Size: | 8 oz. |
|---|---|
| Weight: | 0.64 lb. |
| Maximum Application Temperature °F: | 110ºF |
| Maximum Application Temperature °C: | 43ºC |
| California VOC Compliant: | Yes |
| Maximum Use Temperature °F: | 200ºF |
|---|---|
| Set Speed: | Medium Set |
| Brand: | Oatey |
| Product Type: | CPVC Cement |
| Color: | Gold |
| Set Type: | Cold Weather (< 32° F) |
| Material: | CPVC |
More Specifications
Technical Resources (8)
More Downloads
Available in 3 variations
Frequently Asked Questions
What PVC cements allow for the longest set-up time, for multiple joint assemblies?
The regular body cement has the longest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the regular body cement has the quickest set up time before the joint is assembled because of the quick evaporation process. Any pipe sizes over 4” should be discussed with the technical department.
What cements allow for the shortest set-up time, for multiple joint assemblies?
The heavy duty cement has the shortest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the heavy duty cement has the slowest set up time before the joint is assembled because of the slow evaporation process. Any pipe sizes over 4” should be discussed with the technical department.