Oatey® 16 oz. ABS Extra Special Medium Body Black Cement
Oatey® Extra Special Medium Black ABS Cement is recommended for all non-pressure applications. It is formulated for use in the hot and arid climates in the western United States and is easy to apply with included in-lid dauber. The black color easily identifies application to pipe surface. This low VOC, medium bodied cement can be used to solvent weld all schedules and classes of ABS pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.
Part #: 30918
- Black cement solvent welds ABS pipe and fittings, dauber included
- For all non-pressure applications in hot and arid climates
- Medium viscosity easily fills gaps and provides more working time
- Can be used on all schedules and classes of ABS pipe and fittings up to 6 in. diameter with interference fit
- Recommended application temperature of 40°F to 110°F / 4°C to 43°C
- All Oatey solvent cement and primer products are certified to UL Greenguard Gold
- Low VOC solvent cement that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements
- Meets ASTM Standard D2235 and complies with NSF/ANSI 61 health effects requirements
- Please refer to the Oatey Limited Warranty for warranty details
|Maximum Application Temperature °F:||110|
|Maximum Application Temperature °C:||43|
|Set Speed:||Fast Set|
|Product Type:||ABS Cement|
|Set Type:||Standard (40 - 105° F)|
|Maximum Use Temperature °F:||180|
|Cherne Specialty Chemical:||No|
Available in 5 Variations
Showing 5 of 5
There are no results available
Cure times vary depending on a wide variety of factors. Please review the documents below and read our blog for more helpful information. Solvent Cement Cure Charts Solvent Cement Instructions
What PVC cements allow for the longest set-up time, for multiple joint assemblies?
The regular body cement has the longest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the regular body cement has the quickest set up time before the joint is assembled because of the quick evaporation process. Any pipe sizes over 4” should be discussed with the technical department.
What cements allow for the shortest set-up time, for multiple joint assemblies?
The heavy duty cement has the shortest working time once the joint has been assembled on pipe sizes up to 4” diameter. However, the heavy duty cement has the slowest set up time before the joint is assembled because of the slow evaporation process. Any pipe sizes over 4” should be discussed with the technical department.