Is plastic hanger strap approved for supporting pipes?
No. Plastic hanger strap should only be used for temporary or non-load bearing applications. It can also be used as a mid-level strapping where required by code.
< Supply Hangers (CTS)
Oatey® Dual Wall Bracket for Self-Closing Pipe Clamps
Key Features & Benefits
- Dual wall bracket for Oatey Self-Closing Pipe Clamps
- Allows for perfectly spaced hot and cold water lines
- Mounts two pipes by easily sliding on two self-closing clamps
- Secures to wood or metal studs with a single screw
- Allows for 3/16 in. lateral adjustment
- Distance between the pipe and the wall is equal to that of a single clip
- Made of corrosion-free polyamide and resistant to UV, aging, oil and gasoline
- Temperature resistant from -40°F to 200°F constant, +270°F peak
- Self-closing clamps available separately
- Suitable for self-closing clamps up to 3/4 in. CTS
- 100-pack
Specifications
| Brand: | Oatey |
|---|---|
| Color: | Gray |
More Specifications
Technical Resources (6)
More Downloads
Frequently Asked Questions
Are any of the plastic pipe support clamps approved for use with hydronic systems?
Yes. All Oatey plastic pipe supports are approved for this application, but you should confirm the maximum temperature that the pipes will reach when in use. With the exception of the DuoFit Pipe Clamps rated from 0°F to 230°F and the Stand-Off Half Clamps rated from -60°F to 160°F, all other Oatey plastic straps are rated from 0°F to 180°F.
How far apart should I put the pipe supports?
There are several variables involved with the answer to this question; size of pipe, pipe material and changes in direction. It is always best to check with your local building officials for new installation applications, but you can also reach out to our customer service department for assistance when completing a repair project.