Is plastic hanger strap approved for supporting pipes?
No. Plastic hanger strap should only be used for temporary or non-load bearing applications. It can also be used as a mid-level strapping where required by code.
< Supply Hangers (CTS)
Oatey® CTS J-Hooks
Key Features & Benefits
- 3/4 in. CTS J-hook
- Fits 3/4 in. pipes
- For use with copper, CPVC and PEX piping
- Secures tubing to joists and rafters
- Enables the expansion and contraction of multiple pipes
- Made of high-impact ABS plastic
- Nails flush against a wall or stud
- 50 lb. workload capacity
- 240°F temperature rating
Specifications
| Unit Per Bag: | 25 |
|---|---|
| Weight: | 0.04 lb. |
| Material: | Plastic |
| Brand: | Oatey |
| Multi Size: | No |
| Nail: | Yes |
More Specifications
Technical Resources (5)
More Downloads
Available in 8 variations
Frequently Asked Questions
Are any of the plastic pipe support clamps approved for use with hydronic systems?
Yes. All Oatey plastic pipe supports are approved for this application, but you should confirm the maximum temperature that the pipes will reach when in use. With the exception of the DuoFit Pipe Clamps rated from 0°F to 230°F and the Stand-Off Half Clamps rated from -60°F to 160°F, all other Oatey plastic straps are rated from 0°F to 180°F.
How far apart should I put the pipe supports?
There are several variables involved with the answer to this question; size of pipe, pipe material and changes in direction. It is always best to check with your local building officials for new installation applications, but you can also reach out to our customer service department for assistance when completing a repair project.