How do I install a No-Caulk Shower Drain (step by step)?
Contact our customer service department and they will be happy to send you a copy of the instruction sheet and exploded view drawing.
Oatey® All Plastic Snap-In Drains
Oatey® All Plastic Snap-In Drains
Oatey® All Plastic Snap-In Drains
Oatey® All Plastic Snap-In Drains
Oatey® All Plastic Snap-In Drains
Oatey® All Plastic Snap-In Drains
Oatey® All Plastic Snap-In Drains are designed for drainage in areas that don't require a waterproofing membrane, such as basement drains. The 2 in. PVC Snap-In Floor Drain with 2-1/4 in. Strainer can be inserted into a piece of Schedule 40 DWV pipe that has been cut flush with the finished floor for easy removal or can be solvent welded for permanent installation (pipe and cement not included). This drain is also suited for use as a vent stack or air inlet strainer. Its 1-piece assembly prevents the cover from being removed. Oatey products have earned the trust of plumbing professionals for over 100 years.
Key Features
Key Features
- Designed for drainage in areas that don't require a waterproofing membrane
- Can also be used as a vent stack or air inlet strainer
- 1-piece design prevents the cover from being removed
- For use with specialty drains
- Easy to install
- Durable construction
Specifications
Specifications
| Brand: | Oatey |
| Cover Design: | Snap-In |
| Adjustable: | Yes |
Available in 6 Variations
Filter by
Filter by
Color / Finish
Material
Pipe Size
Weight
Drain Orientation
Shape
Connection Type
Product Type
Size
Showing 6 of 6
Oatey® 2 in. ABS Snap-In Drain
[UPC] 038753435602
[Part #] 43560
Color: Black
Material: ABS
Pipe Size: 2 Inches
Weight: 0.05 lb.
View
Oatey® 2 in. PVC Snap-In Drain
[UPC] 038753435619
[Part #] 43561
Color: White
Material: PVC
Pipe Size: 2 Inches
Drain Orientation: General Purpose
Shape: Round
Connection Type: Solvent Weld
Product Type: General Purpose
Weight: 0.05 lb.
View
Oatey® 3 in. ABS Snap-In Drain
[UPC] 038753435640
[Part #] 43564
Color: Black
Material: ABS
Pipe Size: 3 in.
Size: 3 in.
Drain Orientation: General Purpose
Shape: Round
Connection Type: Solvent Weld
Product Type: General Purpose
Weight: 0.15 lb.
View
Oatey® 3 in. PVC Snap-In Drain
[UPC] 038753435657
[Part #] 43565
Color: White
Material: PVC
Pipe Size: 3 in.
Drain Orientation: General Purpose
Connection Type: Solvent Weld
Weight: 0.2 lb.
View
Oatey® 4 in. ABS Snap-In Drain
[UPC] 038753435688
[Part #] 43568
Color: Black
Material: ABS
Pipe Size: 4 in.
Drain Orientation: General Purpose
Shape: Round
Connection Type: Solvent Weld
Product Type: General Purpose
Weight: 0.2 lb.
View
Oatey® 4 in. PVC Snap-In Drain
[UPC] 038753435695
[Part #] 43569
Color: White
Material: PVC
Pipe Size: 4 in.
Drain Orientation: General Purpose
Shape: Round
Connection Type: Solvent Weld
Product Type: General Purpose
Weight: 0.25 lb.
View
There are no results available
Related Resources
FAQs
Where do you put the rubber washer and paper ring when installing a shower drain?
The large rubber sealing washer will be placed up against the underside of the shower base, and the friction washer will be placed between the rubber sealing washer and locking nut. Contact our customer service department and they will be happy to send you a copy of the instruction sheet and exploded view drawing.
Is the flat side of the No-Caulk gasket facing up or down when it is put over the drain pipe?
The flat side of the gasket should be at the bottom of No-Caulk drain body, seating onto the inside lip of the body. The beveled side of the gasket will be facing up.
Oatey Blog
Videos
Case Studies
It appears that you're using an unsupported browser.
If you are currently using Internet Explorer we recommend you switch to Edge or another supported browser to enjoy the best experience Oatey.com has to offer.