What materials are the bath waste/overflow available in?
There are four materials to choose from:
17 gauge brass tubular
Polyethylene plastic tubular
PVC full and half kits
ABS full and half kits
Dearborn® Sch. 40 Bath Waste Rough-in Half Kits
Dearborn® Sch. 40 Bath Waste Rough-in Half Kits
Dearborn® Sch. 40 Bath Waste Rough-in Half Kits
Dearborn® Sch. 40 Bath Waste Rough-in Half Kits
Dearborn® Sch. 40 Bath Waste Rough-In Half Kits Less Trim includes an overflow elbow and drain elbow plus spud.
Key Features
Key Features
- IAPMO approved
- Captive nut on Phillips head screw, so it cannot fall into tub drain
- Comprehensive installation guide provided with every kit
- Orienting grooves so the faceplate cannot spin
Specifications
Specifications
| Brand: | Dearborn |
| Kit Type: | Rough Kit |
| Connection Type: | Solvent Weld |
Available in 5 Variations
Showing 5 of 5
Dearborn® DBlue Rough-In Kit, Schedule 40 - PVC, Chrome Finish Trim
[UPC] 041193006790
[Part #] P7323
Material: PVC
Product Type: Dblue
Weight: 1.05 lb.
View
Dearborn® Dblue Rough-In Kit, Schedule 40 - PVC with Zinc Spud, Chrome Finish Trim
[UPC] 041193732330
[Part #] P7323RKZ
Color: Zinc
Material: PVC
Product Type: Traditional
Weight: 0.95 lb.
View
Dearborn® Traditional, Rough-In Kit, Schedule 40 - PVC, Chrome Finish Trim
[UPC] 041193016638
[Part #] P7223RK
Material: PVC
Product Type: Traditional
Weight: 0.95 lb.
View
Dearborn® Traditional Rough-In Kit, Schedule 40 – PVC withCondensate Elbow, Chrome Finish Trim
[UPC] 041193004208
[Part #] P7223CRK
Material: PVC
Product Type: Traditional
Weight: 0.9 lb.
View
Dearborn® Traditional Rough-In Kit, Schedule 40 - ABS, Chrome Finish Trim
[UPC] 041193016652
[Part #] A7223RK
Color: Black
Material: ABS
Product Type: Traditional
Weight: 0.65 lb.
View
There are no results available
Related Resources
FAQs
How is a bath waste/overflow tested for leaks after installation?
If you are just replacing an existing bath waste/overflow with a new one, a draining test will work. This test is completed by closing the stopper and filling the tub with cold water until it starts to flow through the overflow plate, and then shut off water and inspect all connection points behind the tub. Use cold water for energy savings. If the bath waste/overflow are part of a larger plumbing system installation, reach out to your local building officials to find out what type of test is required.
Does Cherne offer a plug that can be used to plug a bathtub waste and overflow when conducting a rough-in test?
Yes. The #012678 Tub Plug Set.
Videos
Case Studies
