Cherne® Air-Loc® Plug 15-32 in. I-Series with RPD
Cherne® Air-Loc® Front Plugs are leak locator plugs designed for line acceptance tests and leak location testing. They also can be used as blocking plugs by plugging the fill and read-back ports. Cherne Industries is a global leader in pipe plugs and testing.
Part #: 317338
- Designed for low presure air testing and leak location testing
- Color coded inflation ports match hose and panel for Air-Loc system
|Deflated Length:||48 in. (1219 mm)|
|Maximum Back Pressure:||12.2 psi|
|Deflated Diameter:||14.3 in. (363 mm)|
|Inflation Thread:||1/4 in.|
|Inflation Pressure:||25 psi (1,72 bar)|
|Chain Eye Bolts:||0.75 in. Eyebolt|
Available in 24 Variations
Maximum Back Pressure
Color / Finish
Chain Eye Bolts
Showing 24 of 24
There are no results available
Cherne offers a 2 year warranty on all pneumatic plugs from date of manufacture, (plugs are post-dated by six months to allow for shelf time). If kept in controlled conditions (not exposed to sunlight and kept at temperatures between 0-125 degrees F) the pneumatic plugs remain in good condition for a longer period of time. Plugs should always be inspected for visual damage prior to every use.
What type of rubber is a Cherne pneumatic plugs made from?
All of Cherne’s pneumatic pipe plugs are made from natural rubber. The only exception is our yellow pillow plugs which are made from a polyurethane impregnated fabric.
How often should a pneumatic plug pressure be checked?
Inflation pressure should be checked a minimum of once every 4 hours while a pneumatic plug is in use.