There are two ways to complete this application. The first is to use one of the
approved adhesives from Liquid Nail product line; apply this product with a 1/8" trowel up the front, back and top surfaces of the curb. Then press the liner down to conform to the curb shape, and finally nailing the liner at the top edges and on the outside curb surface. The second method is to cover (wrap) all three sides of the curb with a cut (scrap) piece of liner and nail it into place, these nails can be located anywhere because they will be covered by the second (finished) piece of pan liner. All the nails must be flush or recessed into scrap piece of liner, without any sharp edges exposed. Then after cutting your finished liner to size and reaching the curb wrapping step, apply the appropriate solvent cement for that material and cement the finished liner to the scrap liner.
