Oatey® Copper Tube Straps secure copper tube size (CTS), PEX or CPVC water lines against rigid surfaces. Will secure piping to stud, joist or masonary block to reducing rattling noise. Oatey products have earned the trust of plumbing professionals for over 100 years.
- 3/4" Copper tube strap
- Use with copper, PVC, CPVC, galvanized, polybutylene and other piping systems
- Allows pipe to be flush mounted to walls, joists and rafters
- Copper plated steel
- Pre-drilled hole for fast screw installation
- For warranty product details, refer to the Oatey Limited Warranty document
Available in 4 Variations
Showing 4 of 4
There are no results available
No. Plastic hanger strap should only be used for temporary or non-load bearing applications. It can also be used as a mid-level strapping where required by code.
Are any of the plastic pipe support clamps approved for use with hydronic systems?
Yes. All Oatey plastic pipe supports are approved for this application, but you should confirm the maximum temperature that the pipes will reach when in use. With the exception of the DuoFit Pipe Clamps rated from 0°F to 230°F and the Stand-Off Half Clamps rated from -60°F to 160°F, all other Oatey plastic straps are rated from 0°F to 180°F.
How far apart should I put the pipe supports?
There are several variables involved with the answer to this question; size of pipe, pipe material and changes in direction. It is always best to check with your local building officials for new installation applications, but you can also reach out to our customer service department for assistance when completing a repair project.