The Oatey® Bell Trap Drain is designed for use in garage, patio or other outdoor use. The water drains into a well in the drain unit that serves as a trap to contain sewer gas. The strainer snaps onto the drain body. The 1-1/2 x 2 in. Bell Trap Drain fits over 1-1/2 in. or inside of 2 in. Sch. 40 DWV pipe. Oatey products have earned the trust of plumbing professionals for over 100 years.
Key Features & Benefits
|Drain Orientation:||General Purpose|
|Product Type:||General Purpose|
Technical Resources (3)
Available in 4 variations
Frequently Asked Questions
Contact our customer service department and they will be happy to send you a copy of the instruction sheet and exploded view drawing.
Where do you put the rubber washer and paper ring when installing a shower drain?
The large rubber sealing washer will be placed up against the underside of the shower base, and the friction washer will be placed between the rubber sealing washer and locking nut. Contact our customer service department and they will be happy to send you a copy of the instruction sheet and exploded view drawing.
Is the flat side of the No-Caulk gasket facing up or down when it is put over the drain pipe?
The flat side of the gasket should be at the bottom of No-Caulk drain body, seating onto the inside lip of the body. The beveled side of the gasket will be facing up.