




Oatey® 2" – 3" 160 DFU Sure-Vent AAV 2" x 3" Sch. 40 ABS adapter

Oatey® Sure-Vent® 160 DFU Capacity Air Admittance Valve's one-way valve is designed to allow air to enter the plumbing drainage system when negative pressures develop in the piping system.
UPC: 038753392219
Part #: 39221
Key Features
Key Features
- Complies to ASSE Standard 1050 and 1051
- For use as a secondary vent
- One size approved to handle up to 4" vent pipe
- Opens/closes as needed by building's plumbing system
Specifications
Specifications
Material: | ABS |
Brand: | Oatey |
Connection Size: | 2 in. |
DFU Rating: | 160 Branch, 72 Stack |
Color: | White |
Adapter Material: | ABS |
Adapter Size: | 2 in. - 3 in. |
Related Resources
FAQs
No. The Sure-Vents are not designed for exposure to Ultra Violet Rays.
Can the Sure-Vent be installed in the attic?
Yes, with exceptions. The attic has certain conditions that can affect the AAV performance which should be considered before choosing this as a location. The temperature ranges that the Sure-Vent will operate in are -40°F to 150°F, your attic can experience drastic temperature variations depending on how it is vented and your geographic location. Insulation fibers can get caught inside the diaphragm which will make it harder for the diaphragm to open, or achieve a good seal when it is in the closed position. The Sure-Vent should be installed a minimum of six inches above the finished height of your insulation, and the attic must have an access point to conduct scheduled maintenance.
How high above the fixture trap should the Sure-Vent be located?
A minimum of four inches above the horizontal branch drain (trap).
Oatey Blog
Videos
Case Studies
It appears that you're using an unsupported browser.
If you are currently using Internet Explorer we recommend you switch to Edge or another supported browser to enjoy the best experience Oatey.com has to offer.