Oatey® 1/2 in. Half Clamp w/ barbed nail (12 in polybag)
Oatey® Pipe Clamps With Nails are designed with a preloaded nail feature that provides fast and easy installation for all types of copper tube size piping. Pipe Clamps with Nails eliminate contact between the pipe and framing surface and insulate against sound, can be used with hydronic heating systems and are available in half and full clamp styles. Oatey products have earned the trust of plumbing professionals for over 100 years.
Part #: 33910
- Ribbed design insulates against water line noise
- Non corrosive
- Made of high impact polypropylene plastic
- Rust resistant nails
- Can be used on hydronic systems
- UPC listed
No. Plastic hanger strap should only be used for temporary or non-load bearing applications. It can also be used as a mid-level strapping where required by code.
Are any of the plastic pipe support clamps approved for use with hydronic systems?
Yes. All Oatey plastic pipe supports are approved for this application, but you should confirm the maximum temperature that the pipes will reach when in use. With the exception of the DuoFit Pipe Clamps rated from 0°F to 230°F and the Stand-Off Half Clamps rated from -60°F to 160°F, all other Oatey plastic straps are rated from 0°F to 180°F.
How far apart should I put the pipe supports?
There are several variables involved with the answer to this question; size of pipe, pipe material and changes in direction. It is always best to check with your local building officials for new installation applications, but you can also reach out to our customer service department for assistance when completing a repair project.