Is plastic hanger strap approved for supporting pipes?
No. Plastic hanger strap should only be used for temporary or non-load bearing applications. It can also be used as a mid-level strapping where required by code.
Oatey® Half Clamp Suspension Pipe Clamps
Oatey® Half Clamp Suspension Pipe Clamps
Oatey® Half Clamp Suspension Pipe Clamps
Oatey® Half Clamp Suspension Pipe Clamps eliminate contact between the pipe and framing surface to reduce the transmission of water line noise.
Technical Resources (4)
Technical Resources (4)
Key Features
Key Features
- No corrosion -- made of durable polypropylene
- Ribbed design allows faster cooling and pipe expansion and contraction
- Can be used on hydronic systems
- UPC listed
Specifications
Specifications
| Material: | Plastic |
| Brand: | Oatey |
| Multi Size: | No |
| Nail: | No |
Available in 9 Variations
Showing 3 of 9
Oatey® 1-1/2" Suspension Pipe Clamp (25 in polybag)
[UPC] 038753339573
[Part #] 33957
Unit Per Bag: 25
Oatey® 1-1/4" Suspension Pipe Clamp (25 in polybag)
[UPC] 038753339566
[Part #] 33956
Unit Per Bag: 25
Oatey® 1" Suspension Pipe Clamp (50 in polybag)
[UPC] 038753339375
[Part #] 33937
Oatey® 1/2" Suspension Pipe Clamp (100 in polybag)
[UPC] 038753339351
[Part #] 33935
Unit Per Bag: 100
Oatey® 2" Suspension Pipe Clamp (25 in polybag)
[UPC] 038753339580
[Part #] 33958
Unit Per Bag: 25
Oatey® 3/4" Suspension Pipe Clamp (100 in polybag)
[UPC] 038753339368
[Part #] 33936
Unit Per Bag: 100
Oatey® 1" Suspension Pipe Clamp (6 in polybag)
[UPC] 038753338767
[Part #] 33876
Unit Per Bag: 6
Oatey® 1/2" Suspension Pipe Clamp (6 in polybag)
[UPC] 038753339146
[Part #] 33914
Unit Per Bag: 6
Oatey® 3/4" Suspension Pipe Clamp (6 in polybag)
[UPC] 038753339153
[Part #] 33915
Unit Per Bag: 6
There are no results available
Related Resources
FAQs
Are any of the plastic pipe support clamps approved for use with hydronic systems?
Yes. All Oatey plastic pipe supports are approved for this application, but you should confirm the maximum temperature that the pipes will reach when in use. With the exception of the DuoFit Pipe Clamps rated from 0°F to 230°F and the Stand-Off Half Clamps rated from -60°F to 160°F, all other Oatey plastic straps are rated from 0°F to 180°F.
How far apart should I put the pipe supports?
There are several variables involved with the answer to this question; size of pipe, pipe material and changes in direction. It is always best to check with your local building officials for new installation applications, but you can also reach out to our customer service department for assistance when completing a repair project.
Oatey® 1" Suspension Pipe Clamp (6 in polybag)
