Oatey® 1/2"- 3/4" DuoFit Pipe Support System with Nail (400 in 2.1 Gal. Bucket)
Oatey® DuoFit™ Pipe Support With Nails provides fast and easy installation for 1/2" and 3/4" copper tube size piping (CTS) with one clamp. Eliminates contact between the pipe and framing surface and insulate against sound. Oatey products have earned the trust of plumbing professionals for over 100 years.
Part #: 34297
- 1/2" and 3/4" pipe support
- Eliminate contact between the pipe and framing surface and insulate against sound
- Use on copper, CPVC and PEX
- Move pre-loaded nail to keep pipe off of stud
- Temperature range: 0°F - 160°F
- Constructed of black polypropylene
- For warranty product details, refer to the Oatey Limited Warranty document
Available in 3 Variations
Showing 3 of 3
There are no results available
No. Plastic hanger strap should only be used for temporary or non-load bearing applications. It can also be used as a mid-level strapping where required by code.
Are any of the plastic pipe support clamps approved for use with hydronic systems?
Yes. All Oatey plastic pipe supports are approved for this application, but you should confirm the maximum temperature that the pipes will reach when in use. With the exception of the DuoFit Pipe Clamps rated from 0°F to 230°F and the Stand-Off Half Clamps rated from -60°F to 160°F, all other Oatey plastic straps are rated from 0°F to 180°F.
How far apart should I put the pipe supports?
There are several variables involved with the answer to this question; size of pipe, pipe material and changes in direction. It is always best to check with your local building officials for new installation applications, but you can also reach out to our customer service department for assistance when completing a repair project.