Hercules® Gallon PVC and CPVC Purple Primer
Hercules® Purple Primer for PVC and CPVC Pipe and Fittings is a professional-grade primer for use on all schedules and classes of PVC and CPVC pipe and fittings. It removes contaminants such as surface dirt, grease and grime as well as softens the pipe surface to allow for a fast, secure solvent weld. This primer's purple tint provides visible verification that a primer has been used, which is ideal for areas where plumbing code require this proof. Behold the power of Hercules®, products built to last and trusted by plumbers to withstand even the toughest conditions.
Part #: 60425
- Easy to apply on any diameter of PVC or CPVC piping; not recommended for use on ABS piping installations
- Professional-grade purple primer for PVC and CPVC pipe, fittings
- Purple tint ideal when plumbing code requires primer verification
- Removes surface dirt, grease and grim while pre-softening pipe
- Allows for a fast, secure solvent weld
- Recommended application temperature of -15°F to 110°F / -26°C to 43°C
- All Hercules solvent cement and primer products are certified to UL Greenguard Gold
- Low VOC, high performance primer that meets California South Coast Air Quality Management Districts (SCAQMD) 1168/316A or BAAQMD Method 40 requirements, meets ASTM Standard F656 and complies with NSF/ANSI 61 health effects requirements
- Please refer to the Oatey Limited Warranty for warranty details
|Maximum Application Temperature °F:||110|
|Maximum Application Temperature °C:||43|
|Maximum Use Temperature °F:||200|
Unfortunately once purple primer comes into contact with any material, the affect is permanent.
How do I remove Tamper Proof Lids off Cleaner and Primer cans?
We have posted a direction sheet for this process on our website in the technical bulletin and FAQ sections.
What should I do if there is a taste and odor in the CPVC water lines shortly after installation, how can I solve these issues?
Oatey cements and primers have outside lab approval for lines that carry drinking water (NSF). The plumbing system carrying the water should be drained by first shutting the water off at the water meter, which is most commonly found in the basement on the front wall facing the street. If you have a home on slab, it should be in the mechanical room with the furnace and water heater. Open all faucet valves and allow the interior piping system to air dry overnight. This will allow most of the remaining vapors from the cement and primer to dissipate and escape, air movement is a huge plus.