Hydrostatic Test Pumps are designed for pressure testing water lines and sewer force mains as prescribed by AWWA Standard C600 Installation of Ductile-Iron Water Mains and C605 Installation of PVC Pressure Pipe. Aqua-Loc® Hydrostatic Test Pumps are designed to be the most user friendly in the industry. Both Diaphragm and Piston Style pumps are available and come powered by either a Honda or Briggs & Stratton engine.
- Generator features; Converts standard air compressor into a vacuum source for testing, Vacuum generator 460 delivers 14 CFM at 10" Hg - air compressor minimum 7 CFM at 100 PSI, Vacuum generator 600 delivers 42 CFM at 10" Hg - air compressor minimum 85 CFM at 100 PSI
- Pump features: Honda or Briggs and Stratton engine each - each with a low-oil shut off to prevent engine failure, Heavy duty frame with optional wheel kit, Unbreakable aluminum filter jars, Oil-free graphite vane pump for no-fuss lubrication, Draws 10" Hg vacuum in about 2 minutes for a 15' deep manhole (18 CFM at 10" Hg)
|[UPC] 675115045910 · [Part #] 045918|
All of Cherne’s hydrostatic test pumps are designed to pressure test new potable water lines. Piston style pumps can be pressure fed or suction fed. Piston pumps cannot be run dry nor should they be used in conjunction with chlorine. (Chlorine is frequently used when new potable water lines are being tested to avoid contamination). Diaphragm test pumps cannot be pressure fed. However they can be used with an optional gravity feed water tank sold by Cherne, or with a large container (like a garbage can) filled with water into which the intake hose can be placed. Diaphragm pumps can be used with up to a 10% chlorine solution in the test water.
What type of oil / lubricant is used on the hydrostatic test pumps?
Diaphragm Hydrostatic test pumps use oil in the engine, in the gear reduction unit, and in the pump itself. 30 weight motor oil is used for the engine and pump. The gear reduction unit uses 90 weight gear lube. **Piston Pumps only use oil in the engine. (30 weight motor oil.)
Can I order specific parts for a Honda test pump?
Owner’s Manuals and parts lists on all Cherne equipment can be located in the technical section of the Cherne website. http://www.cherneind.com/Data/ “pieces parts” – replacement parts for the hydrostatic test pumps and joint testers. We do not stock engine parts.